Posts

Showing posts from August, 2018

[No Spoiler] Review Film Wiro Sableng Pendekar Kapak Maut Naga Geni 212

Image
Helo Sahabat Movie. Siapa yang tak kenal dengan pendekar Wiro Sableng? Hari ini saya akan mereview film Wiro Sableng Pendekar Kapak Maut Naga Geni 212 besutan rumah produksi Lifelike Pictures yang disutradarai oleh Angga Dwimas Sasongko. Film ini perdana tayang di layar bioskop pada tanggal 30 Agustus 2018. sumber gambar:  quick corp Saya ingat betul dulu saat saya masih berumur 6 tahun an atau sekitar tahun 2003-2005 acara TV atau Film bernuansa kolosal sangat populer mulai dari film misteri gunung berapi (mak lampir), angling darma, Jaka Tingkir dan termasuk series Wiro Sableng. Buat kamu yang ingin bernostalgia dengan film-film kolosal Indonesia, tepat sekali menonton film Wiro Sableng Pendekar Kapak Maut Naga Geni 212 (cukup panjang ya.. judul filmnya ehe..). Saya pribadi sangat menunggu tayangnya film Wiro Sableng, selain saya suka dengan film bergenre kolosal satu hal yang membuat saya sangat penasaran yaitu film Wiro Sableng Pendekar Kapak Maut Naga Geni 212 ini ju

AutoCAD drawing tools: Circle

Image
The circle is a type of command to make a round object closed in AutoCAD. The principle of making a circle is to determine the center point and radius (diameter). There are six ways to create a Circle. How to activate the circle command in AutoCAD: 1. Command method Command: circle 2. Toolbar method Make a Circle with the center-radius method in AutoCAD: 1. Click the Home tab 2. Click the Draw ribbon panel, then click the Circle Click Center-radius logo 3. Determine the center of the circle (point 1) 4. Type the circle radius, for example 3, then press enter If you are interested in this information, you can join this website for FREE! JOIN NOW

AutoCAD drawing tools: Arc

Image
Arc is a type of command in AutoCAD for making arcs (curved lines). There are 11 ways to create Arch including the 3-point method, start-center-end, start-center-angle, etc. How to activate the arc command in AutoCAD: 1. Command method Command: arc 2. Toolbar method Making Arc with 3-point method in AutoCAD: 1. Click the Home tab 2. Click the Draw ribbon panel, then click the Arch logo 3. Click 3-Point 4. Determine the starting point for making an arc (point 1) 5. Determine the second point (point 2) 6. Determine the third point (point 3) If you are interested in this information, you can join this website for FREE! JOIN NOW

AutoCAD drawing tools: Rectangle

Image
The rectangle is a device for creating boxes in AutoCAD. drawing a box with rectangle can be done by clicking directly or entering coordinate numbers through the keyboard. How to activate the rectangle command: 1. Command method Command: rec 2. Toolbar method Make a Rectangle by entering coordinates: 1. Type "REC" in the command bar, then enter. 2. Click the starting point for the box, for example point 1. 3. Type @ 8.5 (8 for x and 5 coordinates for y coordinates), then press enter. If you are interested in this information, you can join this website for FREE! JOIN NOW

AutoCAD drawing tools: Polygon

Image
Polygon functions to create multiple objects with equal lengths. The number of polygon sides that can be formed is at least 3 sides (triangles), while the most sides that can be formed are 1024 sides. A polygon can be formed with two methods, namely Inscribed in circle and Circumscribed about circle. How to activate the polygon function in AutoCAD: 1. Commands Methode Command: polygon 2. Toolbar Methode The differences between Inscribed in circle and Circumscribed about circle Creating Polygons with the Inscribed in circle  Method  : 1. Type "POLYGON" in the command bar, then enter. 2. Type the number of the polygon side, for example 5, then press enter. 3. Click the center point of the polygon. 4. Type I, then press enter. 5. Type the polygon radius, for example 4, then press enter. Creating Polygons with the circumscribed in cycle method: 1. Type "POLYGON" in the command bar, then enter. 2. Type the number of the polygon side, for ex

AutoCAD drawing tools: Polyline

Image
Polyline is a type of drawing commands to create lines, but the resulting object is a polyline single-entity line. Differences polyline commend with Line command Polyline: 1. If it is used for a segment that is segmented, the result of the line is a whole. 2. Can be made in combination with curved lines. Line: 1. If it is used for a segment that is segmented, the resulting line is not a single unit. 2. Cannot be made in combination with curved lines. How to activate the polyline command  in AutoCAD : 1. Command method Command: pline 2. Toolbar method The polyline commands application method: a) Activate the Polyline command b) Click the starting point for making a line (point 1) c) Type @ 5.0 (5 for x, 0 for y), then press enter d) Type @ 8 <30, then press enter e) Type A (arch = curved), then press enter f) Click point 3 (specify curvature) g) Type L (line), then press enter h) Click point 4 (last point), then press enter If you are inte

AutoCAD drawing tools: Multiline

Image
Multiline is a type of drawing command to create double lines  in AutoCAD . The distance between two lines can be adjusted. How to activate the multiline function  in AutoCAD : Command method Type "MLINE" in the command bar How to make a multiline with interregional distance conditions: A) type "MLINE" in the command bar, then enter commands: mline b) type "J" to set the position of the cursor (justification) c) type "z" to position the cursor in the middle (zero) d) type "s" to set the distance between lines e) type the distance the desired line ex: 0.5 f) Click the starting point of the line (point 1) g) point the cursor in the desired direction (up, down, right, or left) + type the desired line length ex: 9 h) press enter to end If you are interested in this information, you can join this website for FREE! JOIN NOW Video Version:

AutoCAD drawing tools: Line

Image
The line is a type of drawing command to make a single straight line. Lines can be made by determining two endpoints. When used to create segmented lines, the lines forming the segment are not integrated (not one unit). How to activate the line function: Commands Methode Toolbar Methode How to make Make a straight line  in AutoCAD : a) type "LINE" in the command bar, then enter  b) Click the starting point for making a line (point 1)  c) press shift + point the cursor in the desired direction (up, down, right, or left) + type the desired line length ex: 9 d) press ENTER * TIPS: making a straight line can also take advantage of ORTHO functions Make a line with the angular conditions: a) type "LINE" in the command bar, then enter b) Click the starting point for making a line (point 1) c) Type the desired angle ex: 30 °, then enter commands: <30 d) Type the desired line length ex: 9  commands: 9 If you ar

AutoCAD: Drafting Setting

Image
Drafting Settings are settings that serve to facilitate the drawing process so that the resulting image is more accurate and precise. Drafting Settings consists of several sub settings including Snap and Grid, Polar Tracking, Object Snap, 3D Object Snap, Dynamic Input, Quick Properties, and Selection Cycling. 1. Snap and Grid Snap is an imaginary auxiliary point to facilitate depiction in AutoCAD, while the grid is an imaginary "checkbox" for easy depiction in AutoCAD. The distance between points or lines can be adjusted according to need. There are two ways to enable Snap and Grid settings in AutoCAD. Snap Grid The first method is to activate the Drafting Settings first. 1) Type "dsettings" in the command bar 2) Press Enter 3) Select the Snap and Grid menu Drafting Setting Commands 4) Then select the "Snap and Grid" menu Snap and Grid Settings 2. Polar Tracking I usually leave this function by

How to Setting Units in AutoCAD

Image
Hello Friend tutor! This time I made an article that discussed how to set units in AutoCAD. I am setting up units in the 2017 version of AutoCAD. Actually, what are the functions of unit settings in AutoCAD? Do you need to do unit settings in AutoCAD? The Units setting is a pre-modeling setting (the initial setting before working in AutoCAD). The unit is the level used to measure (judge, etc.) something; basic size. So it is clear, that this unit setting aims to set the unit of measurement that will be used by us when working in AutoCAD. How do I set up units in AutoCAD? There are two ways to set units in AutoCAD. First using the "manual" method by searching for unit settings via the toolbar. The second is by "automatic" typing commands directly. 1. How to Manual Setting Unit Click "A Button" logo letter A in the top left corner Click Drawing Settings Click Units How to Manual Setting Unit 2. How to Automatic Setting

Coordinate System

Image
Hello Tutor Friend! I have one secret to easily mastering technical drawings especially drawing with "AutoCAD". The secret is the Mastery of Understanding the Coordinate System. If we already understand the coordinate system, I guarantee everyone will quickly understand all forms of functions/commands in AutoCAD. A.  Cartesian Coordinate System a. 2D Cartesian Coordinate System Determined by the X and Y axes (X axis on horizontal lines, Y axis is vertical) Writing (x, y) b. 3D Cartesian Coordinate System Determined by the X, Y and Z axes (X style on the horizontal line, vertical Y axis, and Z style as the point height level) Writing (x, y, z) B.  Polar Coordinate System The Polar coordinate is a coordinate system used to describe a certain distance at a certain angle from the last point. The angle of rotation is counterclockwise (counterclockwise). Polar coordinate function: Search for objects (examples; lines) with a certain length with